Cast Acrylic Sheet
Cast Acrylic Sheet is made by a cell-casting process which provides the following characteristics: best optical-quality, highest long-term design stress, superior weatherability, ease of fabrication, and the highest degree of chemical resistance available in an acrylic sheet.
Plexiglass Sheets - CAST Acrylic
Plexiglass - Cast Acrylic Sheet is optically transparent, unaffected by moisture, and offers a high strength-to-weight ratio, and high light transmittance. Plexiglass - Cast Acrylic sheets can be easily heat-formed without loss of optical clarity. Prolonged exposure to moisture, or even total immersion in water, does not significantly effect the mechanical or optical properties of this outstanding material. Plexiglass Sheets (Acrylic sheets) may vary slightly by brand, but process technique is the more important factor (Cast or Extruded).
Features of Cast Plexiglass Sheets - Cast Acrylic Sheets:
· Plexiglass Cast Acrylic Sheets are 17 times stronger than glass !!
· Economical transparent material that is easily machined & thermoformed
· Note: All sizes are expressed in INCHES.
· Sheets larger than 24" x 48" can be expensive to ship - Select the Smallest Plexiglass Sheet you can Use
· Translucent = Light & Shadows can be seen through Sheet.
· Transparent = Images can be viewed through sheet (like tinted glass)
· Opaque = Neither light nor images can be seen through the sheet.
Why use CAST Acrylic verses EXTRUDED Acrylic ?
· Continuous Service Temp: 180 F (Cast) vs. 160 F (Extruded)
· Formability Temp: 340 F to 380 F (Cast) vs 290 F to 320 F (Extruded)
· Cast acrylic has a higher molecular weight, therefore it will cut, drill and rout cleaner. As you machine cast acrylic, the shavings will flake off whereas the extruded acrylic shavings can gum up on the tool.
· Cast acrylic also offers better glue-joint effectiveness and performs better in laser cutting.
we can pack with pallet and carton boxes, it costs USD40 for one exporting pallet and usd3.8 for one carton boxes .
